Loading

Friday, January 27, 2012

HTC HD2 Apps: Android CM7.2 v2.3.7 Gingerbread SD on HD2


This is the latest version  (January-19-2012)  of Android Gingerbread v2.3.7 for your HD2.
This is by far the best build I have found for the Android on HD2.

This is a SD build not a NAND build (NAND versions replaces WM, SD versions DO NOT replace WM)

This build has everything working!

Working:
  • 3G / Data
  • Audio
  • Bluetooth
  • Wi-Fi
  • 720p PLAYBACK
  • Phone
  • Camera
  • Camcorder (HD !!!)
  • GPS
  • USB Disk
CyanogenMod 7 (CM7) builds are Fast, stable, and offer perfect support for RTL (right to left) languages (like Arabic or Hebrew)

Developer's Page (if you need more help):

Requirements:
- HSPL installed (see step 1 HERE)
- Radio version 2.08 or higher (2.12.50.02_2 recommended) (see step 2 HERE)

Install Instructions:

After installing HSPL and upgrading your radio version (see Requirements).
Copy the Android folder to your SD card .
(should look like this: storage card/Android).
Option 1 (recommended): Install this Android Launcher on WM, set it to "Auto start" and to "3 seconds", and soft reset to start Android.
Option 2: Go to the android folder on the storage card.
Click on the "CLRCAD.EXE" file, ( you will get no action on the screen but it is normal).
Click the "HARET.EXE" file to launch Android!

First boot always takes a long time (about 10 minutes) be patient, it will work, and future boots do not take as long.

After you load Android for the first time  reboot after 10 minuets or so, it's best to leave alone until the reboot.

Known Bugs & Fixes:
    I'm stuck on the gray logo screen for more than 30 minutes - If you are sure you installed the HSPL and the your RADIO is upgraded, format your SD card and try again.
    3G is not working - place the "power control" widget on your home screen (with mobile data and 2G/3G toggle enabled) and make sure they are both on. If it is still not working check your APN settings. or see the developers page for more help.
    The battery is draining too fast -  install this Android Launcher on WM set it to 3 seconds, and soft reset to start Android. Starting Android as fast as possible (before HTC Sense) is crucial for a good and low battery drain.
    Market keeps showing "Force Close" or other errors - 
    1. Change your locale to English (United States) settings->language
    2. Clear market data and cache. settings -> applications ->Market.
    3. Run market.
    4. Change the locale back to the original one.

    USB is not detected by Windows:
    Install this widget: http://adf.ly/428563/dual-mount-sd-widget-zip  and turn ON the debugging mode under application settings.


    Now that you have your Android up and running visit my Android twin site for: Free Android Games and Free Android Apps


    Download This HD2 App Here:





    Talk about it on our Facebook page.
    Megashare
    zip file: 131.59MB



    51 comments:

    1. hey can u please confirm me that the battery life is good with this ROM , cause my battery got drained out when i was using android 2.3.2

      ReplyDelete
    2. hi how do i enable usb disk; i.e. get into the phone and storage card with usb connection through computer? is there some kind of option please help

      ReplyDelete
    3. some games like angry birds didn´t work
      how can i solve this problem ?

      ReplyDelete
    4. oh for angry birds to work you need to move it to the phone. go to settings applications and move it to phone.

      so can somebody help with with the usb disk problem? it keeps asking me for an adb driver

      ReplyDelete
    5. Problem witch syncing more than 4 contacts witch exchange/scalix via ActiveSync

      ReplyDelete
    6. for easy USB /PC connection, I use Droid Explorer:
      http://www.filesonic.com/file/506475504/DroidExplorer.0.8.7.2.zip

      ReplyDelete
    7. How do we get contacts from our HD2 into this Android? Sorry for this kind of question i'm a noob installing this type of things.

      ReplyDelete
    8. if i don't use T Mobile. still can i use this app's

      ReplyDelete
    9. use standard users download

      ReplyDelete
    10. use this to copy your contacts from WM to your Google account (then Google will sync with your Android).
      http://hd2apps.blogspot.com/2010/08/htc-hd2-apps-imobiletool-contacts.html

      ReplyDelete
    11. Hi,

      I am using version 2.3.2, if i instal 2.3.3, will it change or affect any apps /games installed with V2.3.2. I dont want to loose any saved apps and games by new version.

      Thanks for the help

      ReplyDelete
    12. If you don't want to lose your saved apps, backup using "Titanium backup" (search for it on FreeApps4-Android.blogspot.com)

      ReplyDelete
    13. AFTER I RUN HARET FILE THEN HD2 COMES OUT WITH HTC GREEN LOGO.WHAT SHOULD I DO WITH IT.THE PHONE FROZEN EVEN I LEAVE IT FOR 10 MINUTES.I PULL OUT THE BATTERY THE TURN IT ON AGAIN.I LOST QUICK LINKS ON THE SCREEN.THE ONLY THING I CAN DO IS JUST DO THE FACTORY RESET.PLS HELP.

      ReplyDelete
    14. just a question how do i can boot back to WM if i do not like the OS..or can i use both OS interchangeable

      ReplyDelete
    15. if you are stuck on the green HTC logo for more then 10 minutes or so, format your SD card and try again.

      to go back to WM you hold the power button for 3 seconds and click on the pop-up you click on reboot. your phone will reboot to WM.

      ReplyDelete
    16. yes, you should download the "Standard version" (the second link)

      ReplyDelete
    17. hey when i try to launch hspl_2 it says that it is invalid pocket application. what should i do?

      thanks :)

      ReplyDelete
    18. i have wifi connection problem, what should i do? i have rebooted for the first time and wifi works well, the problem appear when i connect to wifi the second time, many thanks

      ReplyDelete
    19. hi..how to format my sd card,pls.TQ

      ReplyDelete
    20. HSPL - should be run from the PC when the HD2 is connected and synced.

      WiFI - try to turn Airplane mode on and off.

      Format SD card - use a card reader or connect your HD2 in storage mode (not active sync).
      then go to "My computer" right click on the storage card and click format.

      ReplyDelete
    21. data problems are not fixed?
      still have to use airplanemode to got data.

      ReplyDelete
    22. what's happened for the android blog (it's not opening):
      http://freeapps4android.blogspot.com/

      ReplyDelete
    23. yes, FreeApps4Android.blogspot.com is down.
      I'm working on it...

      ReplyDelete
    24. i rebooted my hd2 and it turn's back to normal hd2 themes! why like this ?

      ReplyDelete
    25. Dude...your site freeapps4android.blogspot.com is gone...

      ReplyDelete
    26. Hi..My phones goes back to windows when I turn it off. Is there a way to keep android on the phone?if there is a way please gimme a tutorial.TQ

      ReplyDelete
    27. why is it i cant download the games application from the android market?

      ReplyDelete
    28. Hey my led light is staying green constant any fix for that ?-Drew

      ReplyDelete
    29. download 'LED me know' from market

      ReplyDelete
    30. i have an HTC HD 2 and i use an older version of gigerbread. How can i update it without loosing my settings?

      ReplyDelete
    31. I have a problem with the audio, I installed and the audio dont work, help please

      ReplyDelete
    32. How to turn on HTC Sense on this android?

      ReplyDelete
    33. Hey, anyone can help on why sometimes it cant wake the phone to show the lock screen and sometimes the lock screen dim up after showing 1 sec?

      ReplyDelete
    34. Too be more specify, sometime it takes time to load the lock screen. Anyone have any idea on that?

      ReplyDelete
    35. wow it broke my phone....... nothing works....its frozen on a screen i take battery out put it back in goes back to frozen screeen.....FUCK

      ReplyDelete
    36. Just did this, it is awesome! I love my phone now!! I am also using Android Launcher app for minimum waiting time to see if it helps with battery life because the drain is significant.

      ReplyDelete
    37. How i fix the audio im using htc hd2 please

      ReplyDelete
    38. i did everything..all i needed to do was click CLRCAD.EXE and nothing happens..then i click HARET.EXE..i open it then it says LAUNCH A SCRIPT FILE default.txt and beside it RUN..i click RUN but ERROR message comes out..please help me...

      ReplyDelete
    39. im using international hd2...nothing happens when i click CLRCAD and HARET...im done with all the requirements..please help..

      ReplyDelete
    40. i dont know how to run this.... when i click on the haret.exe..... a page comes up two options to run default.txt and something saying start waiting for connections on port 9999. when you connect, youll get a remote hardware examination tool. and then an option listen for network connection. and then a passage saying found machine....... HELP

      ReplyDelete
    41. try to get help on the developers page, I have no idea how to help you, sorry.

      ReplyDelete
    42. Wah.. No Chinese Input oh! Can Somebody Help???

      ReplyDelete
    43. Does is support other languages - for example Polish :) ?

      Thank you very much for this site - you're awesome!

      ReplyDelete
    44. they are several Chinese keyboards on the market (free).

      I think Polish is supported or you can add it with "Custom Locale" app (also free on the market)

      ReplyDelete
    45. Ok, thank you.

      And what about games? Is it possible to play new 3D games on it :) ?

      ReplyDelete
    46. absolutely! visit FreeApps4Android.serveblog.net and check out the games.

      ReplyDelete
    47. So...

      Would Nova HD work too :) ?

      ReplyDelete
    48. I am using NAND build Froyo 2.2, how do I upgrade to this new build?

      ReplyDelete
    49. This is SD version for WinMo. So the only solution I can figure out is to install Windows again.

      ReplyDelete
    50. How to retain the apps installed in previous build?

      ReplyDelete
    51. use "titanium backup" to backup on the previous build and use it again to restore on this build.

      ReplyDelete

    Top 5 Posts of The Week: